frame 1 TM 9-2323-209-34-2-1 b. Removal. 1. 2. 3. 4. NOTE If working on engine LD 465-1 or LD 465-1C (without turbocharger), see view A and do step 1. If working on engine LDT 465-1C (with turbocharger), see view B and do steps 2 and 3. Take out four cap screws with lockwashers (1). Move breather tube support bracket (2) off oil pressure regulator (3). Take off oil pressure regulator. Working under turbocharger (4), take out three capscrews with lockwashers (5, 6, and 7). Unscrew capscrew with lockwasher (8). Move cable clip (9) off oil pressure regulator (10). Take off oil pressure regulator (10) with capscrew and lockwasher (8). Take out capscrew with lockwasher (8) from oil pressure regulator (10). GO TO FRAME 2 2-198