frame 1 TM 9-2320-209-34-2-1 2-18. OIL COOLER RADIATOR REMOVAL AND REPLACEMENT. TOOLS: No special tools required SUPPLIES: Oil cooler gasket and preformed packing set Artillery and automotive grease, type GAA, MIL-G-10924 Tags Oil cooler cover gasket PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Open hood and side panels. Refer to TM 9-2320-209-10. (2) Drain cooling system. Refer to TM 9-2320-209-20. b. Removal. 1. Take out two capscrews, flat washers, and self-locking nuts (1). Take off outer clamp (2). 2. Take out four capscrews and nuts (3). Take off four clamps (4). 3. Slide three dust covers (5) up three fuel injector tubes (6). NOTE Tag three fuel injector tubes (6) so they will be put back the same way. 4. Take off six tube nuts (7 and 8). Take off three fuel injector tubes (6). 5. Plug holes in three fuel injectors (9) and three holes in injector pump head (10). GO TO FRAME 2 2-189