TM 9-2320-209-20-3-4 FRAME 2 1. Put chain (1) in place as shown. 2. Put four spacers (2) in place between two chain rollers (3) as shown. 3. Aline holes and put connecting link (4) in place. 4. Put on keeper (5) and clip (6). 5. Using 15/16-inch wrench, tighten screw (7) to put tension on chain (1). 6. Using 15/16-inch wrenches, hold screw (7) and tighten locknut (8). GO TO FRAME 3 19-81