TM 9-2320-209-20-3-4 FRAME 2 NOTE Check that first layer of cable coils are close together. If needed, use a block of wood to hammer or push cable coils together. Soldier A 1. Working in cab, start engine. Refer to TM 9-2320-209-10. Put power divider lever (1) in REAR WINCH FWD position soldier B is ready. when Soldier B 2. Working in back of truck, hold tension on winch cable (2). Tell soldier A to start winch. Wind up cable in drum (3). Soldier A 3. Stop engine. Refer to TM 9-2320-209-10. NOTE Follow-on Maintenance Action Required: Replace rear winch cable chain assembly. Refer to para 19-10. END OF TASK 19-63