TM 9-2320-209-20-3-4 c. Replacement. FRAME 1 1. Put end NOTE Before putting cable on drum, check that cable winder carriage has reached end of travel towards end of drum. End point of travel is when carriage guide pin in center of vertical slot in carriage is outside of cross chain sprocket. of cable (1) through level winder (2) and put it in place on drum (3). 2. Put clamp (4) on cable (1) and using breaker bar, extension, and screwdriver attachment, screw in and tighten screw (5). GO TO FRAME 2 19-62