TM 9-2320-209-20-3-4 19-11. REAR WINCH CABLE REMOVAL AND REPLACEMENT (TRUCK M764). TOOLS: Breaker bar Extension Screwdriver attachment Wood block, 2 x 4 x 24 inches SUPPLIES: None PERSONNEL: Two EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedure. Remove rear winch cable chain assembly. Refer to para 19-10. WARNING Always wear heavy leather gloves when handling cable. Do not let cable run through hands. Broken or rusty wire can cause serious injury to personnel. b. Removal. FRAME 1 Soldier A 1. Working in cab, start engine. Refer to TM 9-2320-209-10. Pull power divider lever (1) back to REAR WINCH REV position. GO TO FRAME 2 19-60