TM 9-2320-209-20-3-4 g. Assembly (Early Model). FRAME 1 1. Slide nut (1) on cable (2). 2. Put end of cable (2) around thimble (3) and through chain link (4). 3. Make sure that cable (2) is tight around thimble (3). 4. Place loop in vise as shown. Put both halves of split nut (5) in place so that 1/2 inch of cable (2) will stick out from nut (1). 5. Put split nut (5) in vise and press halves of split nut together. 6. Using adjustable wrenches, screw on and tighten nut (1). 7. Check to make sure 1/2 inch of cable is sticking out past nut (1). 8. Take cable (2) from vise. END OF TASK TA 084034 19-54