TM 9-2320-209-20-3-4 19-9. REAR WINCH DRUM CLUTCH LEVER AND GUIDE PLATE AND REPLACEMENT (TRUCK M756A2). TOOLS: Hammer 1/8-inch punch 9/16-inch wrench Flat-tip screwdriver Five-foot prybar Vise REMOVAL, REPAIR, SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 PERSONNEL: Two EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Removal. FRAME 1 1. Working in between cab protector and cab and using hammer and punch, drive out pin (1) holding drum clutch lever (2) to clutch shaft (3). 2. Using 9/16-inch wrench, unscrew and take out two screws, lockwashers, and flat washers (4) from guide plate (5). 3. Take off data plate (6) and guide plate (5). 4. Using screwdriver, pry drum clutch lever (2) from clutch shaft (3). Take out drum clutch lever (2). END OF TASK 19-43