TM 9-2320-209-20-3-4 FRAME 3 1. Put gearshift lever (1) over stub shaft (2). 2. Put bolt (3) through split flange holes at bottom of gearshift lever (1). 3. Using 5/8-inch and 11/16-inch wrenches, screw on and tighten locknut and flat washer (4). 4. Slide rubber boot (5) down over end of gearshift lever (1). NOTE Follow-on Maintenance Action Required: Replace decontamination apparatus bracket assembly. Refer to TM 3-4230-204-12&P. END OF TASK 23-125