TM 9-2320-209-20-3-4 FRAME 3 Soldier A Soldier B Soldier A Soldier B Soldier A Soldier B Soldiers A and B 1. 2. 3. 4. 5. 6. 7. Turn locking latch (1) to lock position. Move and hold rear winch control lever (2) forward against edge of locking latch. Hold up control rod (3) and clevis (4) to check alinement of holes in clevis and pivot arm (5). Check how far clevis must be moved in or out for pin (6) to fit freely through holes. Turn locking latch (1) to unlock position. Move winch control lever (2) to the rear. Using adjustable wrench, turn clevis (4) in or out as needed to aline holes for pin (6). Slowly move winch control lever (2) forward until soldier B tells you to stop. When holes in clevis (4) and pivot arm (5) aline, tell soldier A to stop. Put in pin (6) and check for free fit. If pin fits freely, go to frame 4. If pin (6) does not fit freely, do steps 3, 4, 5, and 6 again. GO TO FRAME 4 TA 080902 19-22