TM 9-2320-209-20-3-4 Section IV. SPECIAL PURPOSE KITS 23-32. DECONTAMINATION APPARATUS MOUNTING BRACKET REMOVAL AND REPLACEMENT. TOOLS: 7/16-inch wrench 11/16-inch open end wrench 5/8-inch open end wrench 9/16-inch wrench (2) SUPPLIES: None PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedure. Remove decontamination apparatus bracket assembly. Refer to TM 3-4230-204-12&P. b. Removal. FRAME 1 1. Slide rubber boot (1) up gearshift lever (2) as shown. 2. Using 11/16-inch and 5/8-inch wrenches, unscrew and take off nut with flat washer (3) from bolt (4). Take out bolt and lift off gearshift lever (2). GO TO FRAME 2 23-120