23-24. SLAVE RECEPTACLE ASSEMBLY REPAIR. TOOLS: 9/16-inch wrench (2) 7/16-inch wrench (2) Soldering iron Flat-tip screwdriver 6-inch pliers Cross-tip screwdriver (Phillips type) TM 9-2320-209-20-3-4 SUPPLIES: Solder PERSONNEL: Two EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Open battery box cover. (2) Disconnect battery ground cable. Refer to Part 1, para 7-58. b. Removal. FRAME 1 1. Using 9/16-inch wrenches, hold capscrew (1) and unscrew and take off nut (2). 2. Take off positive cable (3). GO TO FRAME 2 23-79