TM 9-2320-209-20-3-4 19-5. FRONT WINCH PROPELLER SHAFT REMOVAL AND REPLACEMENT. TOOLS: Pliers 8-ounce ballpeen hammer 1/4-inch punch 9/16-inch wrench (2) SUPPLIES: None PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Removal. 1. 2. GO Working under front of truck and using pliers, pull out one of two cotter pins (1) from shear pin (2) in front universal joint yoke (3). Using hammer and punch, drive shear pin (2) out of universal joint yoke (3). Leave other cotter pin (1) in shear pin. TO FRAME 2 TA 080868 19-16