TM 9-2320-209-20-3-4 c. Replacement. FRAME 1 Soldier A Soldier B Soldier A 1. Put chain sling (1) around drum of winch (2) and join chain sling to hoist. 2. Guide winch (2) when soldier B lifts it off of ground onto truck. 3. Using hoist, lift winch (2) off of ground into place on truck. 4. Tell soldier B when mounting holes of winch (2) are alined. 5. Using 3/4-inch wrench, screw in and tighten six screws (3) with lockwashers (4) and flat washers (5). 6. Do step 5 again on other side of winch (2). 7. Unhook chain sling (1) from hoist and take it off drum on winch (2). NOTE Follow-on Maintenance Action Required: 1. Put front winch propeller shaft back in place. Refer to para 19-5. 2. Put cable back on front winch. Refer to para 19-10. END OF TASK TA 080867 19-15