TM 9-2320-209-20-3-4 FRAME 4 1. 2. 3. 4. 5. 6. 7. Route inlet hose (1) in engine compartment. Put clamp (2) on end of inlet hose (1). Put end of inlet hose (1) on connector (3). Using screwdriver, screw and tighten clamp (2). Route outlet hose (4) in engine compartment. Put clamp (5) on end of outlet hose (4). Put end of outlet hose (4) on connector (6). Using screwdriver, screw and tighten clamp (5). Open opetcocks (7 and 8) at front and rear of engine. NOTE Follow-on Maintenance Action Required: 1. Put on air cleaner filter element, but do not close hood. Refer to TM 9-2320-209-10. 2. Close battery box door. Refer to TM 9-2320-209-10. 3. Start engine. Check for coolant leaks. Refer to TM 9-2320-209-10. 4. Stop engine. Check coolant level. Refer to TM 9-2320-209-10. 5. Close hood. Refer to TM 9-2320-209-10. END OF TASK 23-44