TM 9-2320-209-20-3-4 FRAME 3 1. Put clamp (1) over exhaust tube (2) and aline screw holes. Put in screw (3) and using 7/16-inch wrench, hold capscrew. 2. Working from under right fender and using 7/16-inch wrench, screw on and tighten locknut (4). NOTE Follow-on Maintenance Action 1. Close hood and right side panel. TM 9-2320-209-10. Required: Refer to 2. Close power plant heater box door. Refer to para 23-22. END OF TASK 23-35