TM 9-2320-209-20-3-4 b. Repair. Repair is limited to throwing away damaged parts and getting new parts in their place. c. Replacement. FRAME 1 1. Put identification plate marked AIR (1) over left hole in bracket (2) and put diverter adapter cable assembly (3) through hole as shown. 2. Slide nut and washer (4) over diverter adapter cable (3) and using 9/16-inch wrench, screw on and tighten nut and washer. 3. Put identification plate marked DEFROSTER (5) over right hole in bracket (2) and put diverter cable assembly (6) through hole as shown. 4. Slide nut and washer (7) up over diverter cable (6) and using 9/16-inch wrench, screw on and tighten nut and washer. GO TO FRAME 2 23-19