TM 9-2320-209-20-3-4 FRAME 3 Soldier A Soldier B NOTE Some trucks may have speedometer flexible shaft clamped to floor boards instead of accelerator stop bolt. 1. Using pliers, take cotter pin (1) out of accelerator connecting link (2). Take connecting link out of pedal (3) and lift pedal clear of stop bolt (4). 2. Hold stop bolt (4) from turning. 3. Using 9/16-inch wrench, unscrew locknut (5) and lift clamp (6) off bolt (4). Take clamp off flexible cable (7). NOTE Before taking flexible shaft (7) out of truck, note the way it is routed. Shaft must be put back the same way. 4. Take flexible shaft (7) out of truck. END OF TASK 22-20