TM 9-2320-209-20-3-4 FRAME 2 1. Place gasket (1) on angle drive adapter (2). Aline key (3) with keyway in angle drive adapter and screw on coupling nut (4). Using 1-inch wrench, tighten coupling nut. 2. Put three clamps (5) on flexible shaft assembly (6). Aline holes in clamps with holes in three brackets (7). 3. Join three clamps (5) to brackets (7) using three bolts (8) and three locknuts (9). Using 7/16-inch wrenches, tighten locknuts. END OF TASK 22-12