TM 9-2320-209-20-3-4 FRAME 4 1. 2. 3. Put two clamps (1) on steering column (2). Aline screw holes in plate (3) and reservoir (4) with screw holes in two clamps (1) and put through three cap- screws (5). Using 7/16-inch wrenches, hold three capscrews (5) and screw on and tighten three washers (6) and nuts (7). Put 39-inch hose (8) on cap (9) and put strainer (10) into hose. Put cap on reservoir (4). NOTE Follow-on Maintenance Action Required: Close hood and left side panel. Refer to TM 9-2320-209-10. END OF TASK 21-14