TM 9-2320-209-20-3-4 FRAME 2 1. Working behind instrument panel (1), put pump (2) in place under instrument panel. Using 7/16-inch wrenches, screw in and tighten capscrew (3), two washers (4), and nut (5). 2. Put 7-inch hose (6) and 9-inch hose (7) on pump (2). 3. Put tee fitting (8) on hose (6) and valve (9) on hose (7) as shown. 4. Put 3-inch hose (10) between tee fitting (8) and valve (9). GO TO FRAME 3 21-12