TM 9-2320-209-20-3-4 WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well– ventilated places. Failure to do this may result in injury to personnel and damage to equipment. b. Cleaning. Using solvent, clean all metal parts. c. Inspection and Repair. Check all parts for damage. Throw away any bent, broken or damaged parts. Get new parts in their place. d. Assembly. FRAME 1 1. 2. 3. 4. 5. 6. 7. Push bow top (1) into bow corner (2) and aline holes. Using screwdriver, screw in and tighten two screws (3). Push bow stake (4) into bow corner (2) and aline holes. Using screwdriver, screw in and tighten two screws (5). Put strap (6) against bow corner (2) as shown. Aline holes and hold it in place. Using screwdriver, screw in and tighten screw (7). Do steps 1 through 6 again on other side of bow top (1). END OF TASK 21-3