TM 9-2320-209-20-3-4 19-27. POWER DIVIDER PROPELLER SHAFT ASSEMBLY REMOVAL AND REPLACE- MENT (TRUCK M764). TOOLS: Prybar 9/16-inch wrench (2) Torque wrench, 150 pound-feet capacity SUPPLIES: None PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Removal. FRAME 1 1. 2. 3. GO Using 9/16-inch wrench, hold four cap screws (1). Using 9/16-inch wrench, unscrew and take off four self-locking nuts and lockwashers (2). Take out four cap screws (1) holding flange yoke (3) to companion flange (4) on power divider (5). TO FRAME 2 19-143