TM 9-2320-209-20-3-4 FRAME 2 1. Aline lower hole in power divider control lever (1) with hole in bracket (2). 2. Put spacer (3) into hole in control lever (1). 3. Put lockwasher (4) on screw (5) and put screw (5) through lower hole in control lever (1) and bracket (2). 4. Screw on nut (6). 5. Using 5/8-inch wrench, hold screw (5) and using 11/16-inch wrench, tighten nut (6). GO TO FRAME 3 19-137