TM 9-2320-209-20-3-4 FRAME 4 Soldier A 1. Put control rod assembly (1) with hoist control lever (2) through hole in cab floor. Put two bearing brackets (3) in place. Aline screw holes in bearing brackets with holes in cab floor (4). 2. Put two screws (5) in each of two bearing brackets (3). 3. Using 9/ 16-inch wrench, hold four screws (5). Tell soldier B when ready. Soldier B 4. Working under truck and using 9/16-inch wrench, screw on and tighten four nuts (6). Soldier A 5. Raise back of companion seat (7). 6. Lock hoist control lever (2) in off position. GO TO FRAME 4 19-125