TM 9-2320-209-20-3-4 FRAME 2 1. Using 3/4-inch wrench, screw on nut (1) onto rod (2). 2. Using adjustable wrench, screw on clevis (3) until holes in holes in arm (4). Using 3/4-inch wrench, tighten nut (1). 3. Put clevis pin (5) throuqh holes in clevis (3) and arm (4). clevis aline with Using pliers, put cotter pin (6) through hole in clevis pin and bend open ends of cotter pin. GO TO FRAME 3 19-124