TM 9-2320-209-20-3-3 c. Disassembly of Rack Assembly. FRAME 1 1. Using phillips screwdriver and 1/2-inch wrench, unscrew and take out two screws (1). Take off two washers (2) and clamps (3). 2. Using 1/2-inch socket wrench with extension, unscrew and take off two nuts (4) from each end bow pocket assembly (5). 3. Using 1/2-inch socket wrench with extension, unscrew and take off four nuts (6) from each of three bow pocket assemblies (7). 4. Take off board (8) and board (9). 5. Using mallet, hammer eight square neck screws (10) out of board (8). 6. Using mallet, hammer eight square neck screws (10) out of board (9). END OF TASK 18-57