TM 9-2320-209-20-3-3 1. Put screw (1) through hole in crossmember (2). 2. Hold brace (3) against bottom of crossmember (2) as shown so screw (1) goes through screw hole in brace. Screw on nut (4). 3. Put screw (5) through hole in splashguard (6) and brace (3). Screw on nut (7). 4. Using wrenches, tighten two screws (1 and 5) and nuts (4 and 7). END OF TASK 18-506