TM 9-2320-209-20-3-3 FRAME 2 1. Lift up companion seat frame (1) on driver’s side and put it against driver’s seat base (2). Line up four mounting holes. 2. Put four screws (3) through companion seat frame (1). Start nuts (4). 3. Using 1/2-inch box wrench and 1/2-inch socket wrench, hold screws (3) and screw on and tighten nuts (4). 4. Put lockwashers (5) on two screws (6). Put screws (6) through holes in legs of companion seat frame (1). Using 9/16-inch wrench, tighten screws. 5. Put companion seat cushion (7) down. END OF TASK 18-37