TM 9-2320-209-20-3-3 FRAME 2 Soldiers 1. Lift up gin pole (1) and place it on clamp bracket (2) as shown, A and B Soldier A 2. Hold and support gin pole (1). Soldier B 3. Put pin (3) into hole in 4. Using ½-inch wrench, lockwashers (6). 5. Using 7/16-inch socket, 6. Tighten wing nut (8). Put bracket (4). screw in and tighten screw in and tighten two screws (5) with grease fitting (7). cotter pin (9) through hole in eyebolt (10). 7. Using pliers, open ends of cotter pin (9). NOTE Follow-on Maintenance Action Required: Lubricate grease fitting. Refer to LO 9-2320-209-12/1. END OF TASK 18-481