TM 9-2320-209-20-3-3 FRAME 3 CAUTION 1. 2. 3. Do not overtighten hose fittings when joining hoses. Finger tighten hose adapters. Using two 1-inch wrenches, tighten fittings 1/8 turn more. NOTE Take off caps from hoses and fittings before putting on hose fittings. Using 1-inch wrench, screw on and tighten control valve supply hose assembly (1) to tee pipe (2) as tagged. Take off tags. Using 1-inch wrench, screw on and tighten pump supply hose assembly (3) to tee pipe with check valve (4) as tagged. Take off tags. Using 7/8-inch wrench, screw on and tighten pump bypass hose assembly (5) to tee pipe with check valve (4) and tee-pipe (2). GO TO FRAME 4 18-465