TM 9-2320-209-20-3-3 FRAME 2 1. Lift up other end of drive shaft (1). Aline hole in with those in companion flange (3). 2. Put two screws (4) through holes in universal joint flange (3). 3. Screw on and hand tighten nuts (5) on screws (4). 4. Using 3/4-inch open end wrench, hold screws (4). wrench, tighten nuts (5 and 6). END OF TASK universal yoke (2) joint yoke (2) and companion Using 3/4-inch box 18-440