TM 9-2320-209-20-3-3 FRAME 2 1. 2. 3. 4. GO Put connecting link pins (1) into two ends of chain (2). Put link plate (3) on connecting link pins. NOTE Connecting link pins (1) may have connector plate (4) or two cotter pins (5) . If connecting link pins (1) have a connector plate (4), clip connector plate over link plate (3) and on connecting link pins. If connecting link pins (1) have two cotter pins (5) , using pliers, put in and spread open two cotter pins. Adjust chains. Refer to para 18-80. TO FRAME 3 18-432