TM 9-2320-209-20-3-3 FRAME 3 1. Put cover (1) in place as shown. 2. Using 15/16-inch wrench, screw in and tighten capscrew (2), flat washer (3), lockwasher (4), and bushing (5). 3. Using 7/16-inch wrenches, screw and nut (8) . 4. Put on cover retaining collar (9), 5. Using allen wrench, screw in and setscrew and on collar (9). END OF TASK in and tighten capscrew (6), lockwasher (7), alining setscrew hole in collar with slot. tighten setscrew (10). Put safety wire over 18-427