TM 9-2320-209-20-3-3 FRAME 2 NOTE Cover (1) may need to be turned left or right before lowering so that ends of yoke (2) clear pad eyes (4). 1. Put on inner cover (1) so that end of yoke (2) with eyebolt (3) lines up under upper pad eye (4). 2. Place other end of yoke (2) in lower pad eye (4). 3. Push in pin (5). Put in cotter pin (6). Using pliers, bend open ends of cotter pin. 4. Put end of eyebolt (3) in upper pad eye (4). NOTE Adjustment may be needed to push pin (7) through holes in pad eye (4) and eyebolt (3). Turn eyebolt nut (9) left or right as needed to line up holes. 5. Put in pin (7). Put in cotter pin (8). Using pliers, bend open ends of cotter pin. GO TO FRAME 3 18-349