TM 9-2320-209-20-3-3 b. Repair. (1) Front drive shaft. Repair of the front drive shaft is limited to replace- ment of universal joints. Refer to Part 1, para 10-5 to change snapring type joints. (2) Rear driveshaft. FRAME 1 1. 2. 3. 4. 5. 6. 7. 8. 9. Using pliers, pull off clip (1). Take off connecting link (2). Pull out link (3) and take off sprocket chain (4). Using 1/8-inch allen wrench, unscrew and take out two setscrews (5). Using hammer and punch, tap out two woodruff keys (6). Using 1/8-inch allen wrench, loosen two screws (7). Slide two bearing units (8) off ends of shaft (9). Using 5/16-inch wrench, unscrew and take out two grease fittings (10). Check that all parts are not worn or broken. If part is damaged, get a new one in its place. GO TO FRAME 2 18-328