TM 9-2320-209-20-3-3 18-59. DELIVERY PUMP DRIVE SHAFT REMOVAL, REPAIR, AND REPLACEMENT. TOOLS: 11/16-inch socket Brass punch 11/16-inch wrench (2) 5/16-inch wrench 1/8-inch sockethead screw key 3/16-inch sockethead screw key (Allen wrench or equivalent) (Allen wrench or equivalent) Pliers 9/16-inch wrench (2) 5/8-inch wrench Ratchet 8-ounce ballpeen hammer 2-inch extension Drift pin punch SUPPLIES: None PERSONNEL: TWO EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Removal. FRAME 1 1. Working under truck and using 3/16-inch allen wrench, loosen setscrew (1). 2. Using hammer, lightly tap drive shaft yoke (2) until shaft (3) is off. 3. Go to other end of drive shaft (3). GO TO FRAME 2 18-323