TM 9-2320-209-20-3-3 18-43. STATIC REEL ASSEMBLY REMOVAL AND REPLACEMENT (TRUCK M49A1C). TOOLS: 9/16-inch open end wrench 5/8-inch open end wrench SUPPLIES: None PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. WARNING Smoking, sparks or open flame are not allowed within 50 feet of fuel truck during this task. Fuel may burn, causing explosion, injury to personnel, and damage to equipment. a. Removal. FRAME 1 1. Open truck rear compartment doors. 2. Take two ground clamps (1) off frame (2). 3. Using 9/16-inch and 5/8-inch wrenches, unscrew and take out bolt (3) and nut (4) with lockwasher (5) and flat washer (6). 4. Take out static reel assembly (7). END OF TASK 18-223