TM 9-2320-209-20-3-3 FRAME 2 1. Put inspection cover (1) in place and aline screw holes. Using flat-tip screwdriver, screw in and tighten six screws (2). 2. Put on two washers (3), door handle (4), and window handle (5). Using flat-tip screwdriver, screw in and tighten two screws (6). 3. Put shims (7) and dovetail (8) in place and aline screw holes. Using phillips screwdriver, screw in and tighten two screws (9). 4. Turn window handle (5) to the right until window (10) is all the way up. GO TO FRAME 3 18-8