TM 9-2320-209-20-3-3 b. Replacement. FRAME 1 1. 2. 3. 4. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Using solvent, clean all parts. Put preformed packing (1) in place in groove on rod and cap Put filter element (3) in place on rod and cap assembly (2). gasket (5), and flat washer (6) on threaded end of rod. assembly (2). Put retainer (4), Using torque wrench, screw on and tighten nut (7) to 5 pound-feet. GO TO FRAME 2 18-207