TM 9-2320-209-20-3-3 c. Replacement. FRAME 1 1. Lift segregator unit (1), with right end higher and put it in compartment. Put right end down in place, then push left end in place on two brackets (2). 2. Working at inlet pipe (3), put gasket (4), clamp halves (5), and two capscrews (6) in place. Using wrenches, screw on and tighten two nuts (7). 3. Working at outlet pipe (8), put gasket (4), clamp halves (5), and two capscrews (6) in place. Using wrenches, screw on and tighten two nuts (7). GO TO FRAME 2 18-194