TM 9-2320-209-20-3-3 FRAME 4 1. Put collar (1) onto rear shaft (2) with setscrew (3) lined up with wide groove (4) in rear shaft. Using 3/16-inch allen wrench, tighten setscrew, then unscrew it one turn. 2. Look into yoke from pump (5). Find place where wide groove (4) fits. Line up wide grooves and put rear shaft (2) into yoke from pump. 3. Line up keyway in universal joint (6) with key (7) on intermediate shaft (8) and slide universal joint all the way onto intermediate shaft. 4. Using 3/16-inch allen wrench, tighten setscrew (9). GO TO FRAME 5 18-163