TM 9-2320-209-20-3-3 18-34. DELIVERY PUMP STRAINER AND GASKET REMOVAL AND REPLACEMENT. TOOLS: 3/4-inch wrench Scraper SUPPLIES: Delivery pump gasket Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Compressed air source, 30 psi max PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. WARNING Smoking, flame, sparks, and glowing or hot objects are not allowed within 50 feet of work area. Fuel may burn, causing explosion, injury to personnel, and damage to equipment. a. Removal. FRAME 1 1. Using wrench, unscrew and take out four screws (1). Take off four lock- washers (2). 2. Take off strainer cover (3) and gasket (4). Throw away gasket. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. 3. Using solvent, clean strainer cover (3). Use scraper, if needed, to get off all gasket pieces. GO TO FRAME 2 18-149