TM 9-2320-209-20-3-3 FRAME 2 Soldier A Soldier B Soldier A 1. Put discharge lever (1) for rear discharge valve in the closed position. Refer to TM 9-2320-209-10. 2. Put cable (2) through tube (3) and tell soldier A to take end of cable. 3. Using pliers, put cable end (4) through hole in special bolt (5). 4. Put special bolt (5) in arm (6). Pull cable end (4) to take out most of the slack. Using 1/2-inch wrench, screw on and tighten nut (7). 5. Close truck rear compartment doors. NOTE Follow-on Maintenance Action Required: Lubricate cable. Refer to LO-2320-209-12/1. END OF TASK 18-119