TM 9-2320-209-20-3-3 b. Replacement. FRAME 1 1. Put cable (1) through nut (2). Put cable through hole in valve lever (3) and back through nut, leaving a loose loop at valve lever. Let about 1/2 inch of cable end come out of nut. 2. Put two halves of split screw (4) together around both parts of cable (1) and screw on nut (2). 3. Using 5/8-inch wrench, hold split screw (4). Using 5/8-inch wrench, tighten nut (2). GO TO FRAME 2 18-113