TM 9-2320-209-20-3-3 FRAME 3 Soldier A Soldier B Soldiers A and B 1. 2. 3. 4. 5. END OF TASK Slide gasket (1) toward front of truck. Put on two halves of clamp (2) and hold them in place. Put in two bolts (3). Using 5/8-inch open end wrench, screw on and tighten two nuts (4). Do steps 1 through 4 again for other two discharge pipe clamps (2). NOTE Follow-on Maintenance Action Required: Fill holding compartments with fuel. Refer to TM 9-2320-209-10. 18-86