TM 9-2320-209-20-3-2 FRAME 2 NOTE If truck has power takeoff, do all steps. If truck does not have power takeoff, do steps 1 through 5 only. 1. 2. 3. 4. 5. 6. 7. Push clevis assembly (1) into back as it will go. Put brake pedal lever (3) in clevis Put in clevis pin (4). Using pliers, put in cotter pin (5) of master cylinder assembly (2) as far assembly (1). and bend open ends of cotter pin. Using pliers, hook brake pedal return spring (6) in hole at end of clevis pin (4). Put power takeoff shift lever bracket (7) on master cylinder assembly (2) and aline holes. Using 5/8-inch socket wrench, screw in and tighten two screws (8). GO TO FRAME 3 13-84