TM 9-2320-209-20-3-2 FRAME 5 1. Using 3/4-inch wrench, unscrew and takeout plug (1). 2. Using 9/16-inch socket wrench and 6-inch extension through access hole (2) as shown, unscrew and take out capscrew and lockwasher (3). 3. Using 9/16-inch wrench, unscrew and take out three capscrews and lockwashers (4). 4. Lift front of master cylinder assembly (5) up and back into frame (6) and pull down to take it out. END OF TASK 13-82