TM 9-2320-209-20-3-2 FRAME 3 1. Using 11/16-inch wrench, loosen jamnut (1). 2. Using 0.015-inch feeler gage, check clearance between outer brakeshoe (2) and all along brake drum (3). 3. Using 5/8-inch wrench, screw in adjusting screw (4) until feeler gage just goes in at tightest place. 4. Using 11/16-inch wrench, tighten jamnut (1). 5. Using 0.015-inch feeler gage, check clearance between inner brakshoe (5) and brakedrum (3) all along between points A and B. 6. Using 3/4-inch wrench, turn end-of-cable nut (6) until 0.015-inch feeler gage just goes in at tightest point. GO TO FRAME 4 13-45