TM 9-2320-209-20-3-2 FRAME 3 1. Put handbrake lever (1) in the down position. 2. Using long nose pliers, hold yoke (2) on lever (3). 3. Screw or unscrew handbrake handle (4) until holes in yoke (2) and lever (3) line up. Put clevis pin (5) through holes in yoke and lever. 4. Put washer (6) onto clevis pin (5). Put cotter pin (7) through holes in clevis pin. Using pliers, bend open ends of cotter pin. 5. Screw handbrake handle (4) until it is hand tight. END OF TASK 13-42